How to Make a Single Bracelet

This instructable will show you how to make a single bracelet. This is a pattern for beginners especially if you just started making bracelets. It includes pictures and videos to help you. Good luck!

Place the rubber bands on the pegs with the arrows pointing up. Place the first rubber band on the first peg on the last row diagonally. Then, place the second rubber band on the second peg on the last row diagonally. Keep on doing this until you reach the top of the loom.

Now that you have reached the top of the loom, it is time to loop the bands together. Flip your loom over with the arrows pointing down. With your hook, grab the second rubber band and loop it onto the next peg. Grab the next rubber band and loop it to the next peg. Next, grab the next band and loop it to the next peg. Continue to do this until you have reached the top of the loom.

Once you are done looping the bands, slide a C-clip on the last band that you have just looped.

Grab the C-clip and pull the bracelet off the loom. Do it gently or your bracelet will break.

Grab the end that doesn't have the C-clip on it and put it on the C-clip.

You can now wear your cool bracelet! If this is your first time making bracelets, you should continue to practice this pattern. You can also look at the pictures above to see some ideas on colors.