How to Make Page Markers With Lable, and a Reusible Dispenser

Very easy, quick ,and costs nothing! No more buying those expensive page markers.
All you need is the following:

> Tape
> Paper
> a pencil (or pen or marker)

Measure the width of the tape, and mark it on the paper.

Cut out the paper and draw on it. Get about 2.5'' to 3'' of tape. Lay the tape face up, and put the paper on so that the label is facing up.
Then just fold!

Now you can work on the dispenser for all of the millions of page markers you made.
You will need the following:

> Tape
> 5 Wooden sticks
> Scissors (or wire cutter)

Cut all of the sticks the same length, about 3 times the width of the tape.

Tape 3 of the 5 sticks together side by side.

Now take the 2 non taped sticks and tape them together ,leaving a gap, the width of 1 stick, in between.

Now take the two parts you made and tape them together. (see pic)
Done!

Put your first page marker on the base aligned with the gap.
All of the other page markers ,go on the last one's label. (see pic)

Now just pull up the top one so that it is sticking out of the gap ,and now your dispenser is set!

If you want to reload it ,just take the tape off of one end and open ,and repeat step 8.

Enjoy!