How to Re-design an Old Teck Deck and Make It a Keychain
by Funguystuff in Outside > Skateboarding
2874 Views, 3 Favorites, 0 Comments
How to Re-design an Old Teck Deck and Make It a Keychain
![Foto0082[1].jpg](/proxy/?url=https://content.instructables.com/FJD/R28S/GEG4GVGQ/FJDR28SGEG4GVGQ.jpg&filename=Foto0082[1].jpg)
I was looking for something on an old box and i found this old toy and i began to wonder what could i make with it, so i decided to make a keychain
Materials
![Foto0078[1].jpg](/proxy/?url=https://content.instructables.com/FU5/PKOH/GEG4GVHK/FU5PKOHGEG4GVHK.jpg&filename=Foto0078[1].jpg)
1.- old tedeck
2.- Strong glue
3.-permanent marker (s)
4.-Adhesive sheets of paper (optional)
5.-keychain ring
2.- Strong glue
3.-permanent marker (s)
4.-Adhesive sheets of paper (optional)
5.-keychain ring
Remove Trucks
![Foto0074[1].jpg](/proxy/?url=https://content.instructables.com/FDO/FZTK/GEG4GVHT/FDOFZTKGEG4GVHT.jpg&filename=Foto0074[1].jpg)
if its n original tech deck, unscrew the trucks, but if its not maybe you will just have to pull out them.
Paint and Design
![Foto0075[1].jpg](/proxy/?url=https://content.instructables.com/F0T/JR0I/GEG4GVIR/F0TJR0IGEG4GVIR.jpg&filename=Foto0075[1].jpg)
![Foto0077[1].jpg](/proxy/?url=https://content.instructables.com/FQZ/ZH6N/GEG4GVIU/FQZZH6NGEG4GVIU.jpg&filename=Foto0077[1].jpg)
Paint the deck with your marker (s) and then draw something on the adhesive paper so you later could paste it on the deck.
Install Trucks
![Foto0080[1].jpg](/proxy/?url=https://content.instructables.com/F19/8QCU/GEG4GVJ8/F198QCUGEG4GVJ8.jpg&filename=Foto0080[1].jpg)
Screw the tks again or paste them
Paste the Chain
![Foto0081[1].jpg](/proxy/?url=https://content.instructables.com/FQR/E69H/GEG4GVJK/FQRE69HGEG4GVJK.jpg&filename=Foto0081[1].jpg)
the title says it, paste the chain to the deck!
DONE :D
![Foto0082[1].jpg](/proxy/?url=https://content.instructables.com/FIO/ZF7I/GEG4GVK5/FIOZF7IGEG4GVK5.jpg&filename=Foto0082[1].jpg)
youre done! u have now a teck deck to go!