IRON MAN Concept RFID Door Access

by ksashikumar in Circuits > Gadgets

1252 Views, 14 Favorites, 0 Comments

IRON MAN Concept RFID Door Access

1.jpg

This time we will make IRON MAN concept RFID Door Access Gadget

Requirements

IMG_20160716_105809_HDR.jpg
IMG_20160716_110041_HDR.jpg
IMG_20160716_105843_HDR.jpg
IMG_20160716_111856_HDR.jpg
IMG_20160716_112102_HDR.jpg
IMG_20160716_115120_HDR.jpg

To make this Easy & Cool Gadget. you require an RFID card & a Hand glove.

Cut the RFID Card as per the requirement (NOTE: Take care that the coil & chip inside the RFID card is not damaged.

Cut the Hand glove as shown above in the picture. Decide the area where you need to fix the RFID Card & paste it using a Quick fix glue.

***You are Done***