Identify Label for Usb Cables
Often! I 've confuse that don't know which a cable is Printer or External HDD take to plug to my Labtop (When I 've to hasty to do some job.)
How to know that if I just see the end of a cable which more than one!!..
So,we can Identify all USB cables as we have..Let's make it.
How to know that if I just see the end of a cable which more than one!!..
So,we can Identify all USB cables as we have..Let's make it.
Material & Tool
1.Used PE box
2.Cutlery
3.Scissors
4.Mark Pen
2.Cutlery
3.Scissors
4.Mark Pen
Cut It Out
Cut a PE box as your need How many pices to use.
Cut Into Small One
Cut in into small one as your need to indentify a USB cable.
Puncture the hole for Throw it in a cable.
Puncture the hole at two edges of the label.
Puncture the hole at two edges of the label.
Rip It
Rit it along the length from hole to hole .
Make sure draw it through the center.
Make sure draw it through the center.
Write Down
Write down the device name on a label . by directly mark pen or attach a sticker.
Put It
Put it into the USB cable that all of devices as your need .
Well !! We don't rampage or confuse with these USB cable again.
Free time to work a job...
Free time to work a job...