Illusionist Locket Design for Friends

Hai friend i am back with new work a illusionist locket for friends. i seen many illusion lockets witch seen like heart . so i though that i cant give to every friend like that locket so i have re-design the locket witch work like illusion heart locket.

its the design and measurments for the illusion locket

• wood or your choice of 3 to 5mm thick sheet. i used acrylic sheet of 10x10cm sheet
• screws
• supper glue
• grinder tools
• a small wood ice for the spilt pin
• magnets i got it from the old small speakers

this are the design witch are in dxf and pdf for laser cutting or print out

• the pin must cut in center in to 2 parts
• the split pin is placed in the bottom base sheet hole
• place the screw in the screw hole in the center sheet and glue the head and the nut of the screw to the center sheet in the screw hold slot
• then glue the magnets in the magnets holes
• now place the top sheet on the center sheet as in the images and glue the split pin to the top sheet
• see if there is any problem in the locket and set it
• now you can place the pictures of your friends and yours and gift them
• the process is like the illusionist hart locket only the design is different

NOTE:

• i have place the photo base 1mm below the center sheet surface so that the photo dosnot damages.
• a chain holding hole is given at bottom sheet where u place a hook for the chain

THANK YOU