Improving a Pair of Cheap Barbeque Tongs

by MikeMosher in Cooking > BBQ & Grilling

1740 Views, 6 Favorites, 0 Comments

Improving a Pair of Cheap Barbeque Tongs

IMG_0386.JPG
IMG_0390.JPG
Here is a set of tongs I picked up cheap from the dollar store, upon trying to use them, I realized a huge fault... THEY COULD NOT PICK UP ANYTHING!!! so I made a few modifications and they are much stronger.  You'll need - tongs, something to cut with, and a hammer. This project can be completed at your nearest http://www.techshop.ws/

Test and Cut

IMG_0386.JPG
IMG_0387.JPG
IMG_0388.JPG
my first test was to see if I could crush an egg with these tongs, as you can see, these have little power. I then cut off a few inches of metal and made some teeth at the end.

Final Touches and Retesting

IMG_0390.JPG
IMG_0389.JPG
IMG_0391.JPG
IMG_0392.JPG
After the cutting I made bends at the end of the sides to make gripping easier. I then retested the tongs and found that I could not only crush the egg, but I could pick up the hammer. Quite the improvement.