Incline Bench Chair
Materials you need:
4 ft. of 3/4 x 12 piece of plywood or solid wood 3 ft. of 1 x 2 wood 8 ft. of 2 x 2 wood 8 ft. of 4 x 4 wood post 1 (#10) 8" bolt and nut 2 (#8) 3" bolt and nuts 1 (#10) 12" bolt/screw and 4 bolt nuts 8 (#10) nylon washers 14 (#10) flat washers 4-3 inch long lag screws 4 rubber or rubberized feet Some nails and wood glue Wood stain and Polyurethane protective sealant (Optional)
Tools you need: Circular saw Miter saw (optional) Power drill with drill bits, Forstner bit and the like (used to counter sink lag screws) Wood chisel Socket wrench/ pliers Hammer Sander or Sand paper
Supplies
Table of contents
Materials you need
Step 1-6 : steps to assemble project
Step 7 : video of how it works
Gather all materials and begin your build
Attach the legs to the base of your bench
Add supporters to the legs of your bench
Use hinge attach the incline part of your bench
Add back support beam to the back of the bench
Finish with final support beams across the top of your bench
Enjoy the incline.