Infinity Mirror Jewel Case

by Luce at home in Circuits > LEDs

597 Views, 2 Favorites, 0 Comments

Infinity Mirror Jewel Case

temp_-1142258040.jpg
temp_-697598935.jpg
temp_2070377852.jpg
temp_2081724176.jpg
temp_1551418445.jpg
Jewel case fitted with a small led strip. And some battery's.
Total costs €3

Go to a Hobbyshop and Go to the Car Accessories Section.

temp_1005284406.jpg
temp_2059533327.jpg
temp_-1472835166.jpg
Purchase A led strip designed for vehicle headlights. They measure about 50 cm(a foot and a half) and they come with a little battery unit. Also the width of the strip is half the size of regular led strips.
Here in Belgium and Holland you can get them in "action"stores for 2€

Find a Nonscratched Jewel Case

temp_1492117776.jpg
temp_2059533327.jpg
temp_-1472835166.jpg
There must be one that isn't scratched between the Pyle of jewels you got collected over the years. Found it? Proceed after you take out the plastic disk tray. And the disk, duh.

Get Some Privacy Foil

temp_-271650912.jpg
temp_855416866.jpg
temp_93469104.jpg
Get mirror foil in the store and use the inlay of the jewel case to cut out the right size. I used some scrap foil I had laying around.
Do the same for the Inlay case.
Don't cut it larger than the inlay, or it will not stick properly in the corners

Make a Hole and Remove Flaps.

temp_93469104.jpg
temp_-697598935.jpg
temp_2070377852.jpg
On the side of the jewel case are little flaps that u need to remove, if not done yet. Also create a hole for the wire to fit trough.

Remove the Sticker Paper and Tape It

temp_-274805629.jpg
temp_2081724176.jpg
temp_1551418445.jpg
on the inside on de sides of de jewel case starting from the battery side. It should fit perfectly. Close the lid and done.

Enjoy Your Infinity Mirror Jewel Now

temp_-2004126549.jpg
temp_1726034651.jpg
You can place the disk back only without the inlay tray.