Installing & Using Arduino IDE on a Raspberry Pi 3

This Instructable will go through the easy steps in installing the latest version of the Adruino IDE on a Raspberry Pi.

The Arduino IDE is available for all the major operating systems, but will show how to install it on a Raspberry Pi 3 model B running Raspbian Jessie in the GUI. An active connection to the internet will be required and to get the full experience the Raspberry Pi also needs to be connected to a screen, keyboard and mouse.

The easiest way to install packages is from the terminal.

To make sure Raspbian Jessie is up to date use:

sudo apt-get update

sudo apt-get upgrade

Install Arduino IDE with:

sudo apt-get install arduino

After connecting a Arduino board to the Raspberry Pi using the appropriate cable, pull down the Raspbian main Menu and select Arduino IDE under Electronics. It will open with a blank screen.

To choose the type of Arduino board go to Tools > Board > and select the appropriate one.\

To select the port the Arduino is connected to, look under Serial Port under the Tools menu.

Example sketches can be chosen from Examples under the File menu. To test if everything is working choose Examples > 01.Basics > Blink. This will open the default blink sketch on a new screen. You can now close the old one.

After pressing the Upload button (->) the Arduino’s on-board LED should start to blink on and off at one second intervals.

That's it! If the board's build-in LED is blinking the setup is complete!

For more information & tips about the Arduino IDE, see my Blog.

Enjoy =)-~