Instructables Paper ROBOT by Frankyfly
by Frankyfly in Living > Toys & Games
7913 Views, 9 Favorites, 0 Comments
Instructables Paper ROBOT by Frankyfly
This is a little cute 3D paper ROBOT from the Instructables LOGO.
It's easy to make.
Download the PDF file for the paper model to print.
Once you have printed it , glue the model on some cardboard and cut it.
You need a blunted object to score the flaps and the lines for an easy folding.
Once finished you'll have a 7 inches high paper model.
Enjoy.
Franky
Downloads
Tools.
- Scissors
- Glue
- paper clip
- ball point pen (for the scoring)
Make the Wheels.
This is the most tricky part to build, I did them (the wheels) as simple as I could.
Just roll the fake treads, score the small flaps and glue them to the sides of the wheels.
Just roll the fake treads, score the small flaps and glue them to the sides of the wheels.
Customize It.
Finish adding the legs and arms to the body.
Customize your ROBOT with your imagination. I used a paper clip to make the antennas.
Customize your ROBOT with your imagination. I used a paper clip to make the antennas.