Insulin Set Changes

by hayleyrn94 in Living > Health

440 Views, 0 Favorites, 0 Comments

Insulin Set Changes

images.jpg

As a type one diabetic, there is one thing almost every single one of us has to do...set changes. This basic step by step guide will show you how to insert the Medtronic Sure-T sets, and set up new reservoirs on your mini med pump.

Gathering Your Supplies

IMG_0536.jpg

First things first, gathering supplies!

You'll need:

1: Insulin

2: A Sure-T set

3: A reservoir

4: optional Tegaderm: Tegaderm is a clear tape that is used to cover incision sites like IVs in hospitals. ( I like using these to make sure the set stays where it's suppose to!)

Preparing the Reservoir

IMG_0537.jpg
IMG_0538.jpg
IMG_0539.jpg
IMG_0540.jpg

Now it's time to fill your reservoir! When you open up the package you will see a blue application cap on the top of the reservoir. Then you take the insulin bottle and push the soft cap onto the needle at the top. Once you hear a click you can start to pull down on the plunger to however amount of insulin you desire. Once full you can pull the insulin off, and twist off the blue applicator.

Preparing the Pump

IMG_0541.jpg
IMG_0542.jpg
IMG_0543.jpg
IMG_0544.jpg
IMG_0545.jpg
IMG_0546.jpg
IMG_0547.jpg
IMG_0548.jpg
IMG_0549.jpg
IMG_0550.jpg
IMG_0551.jpg
IMG_0552.jpg
IMG_0553.jpg

Now its time to get the old reservoir out of your pump and load the new one! Don't worry if you don't have the type of pump I do, all of them give prompts on how to do this step!

1: Locate the options section and new reservoir sections on your pump. You should then be able to rewind and then screw out the old reservoir at the top left and insert the new one.

2: Once the new reservoir is inserted select next, load, and wait for the pump to secure the new reservoir.

3: Then it's time to fill the tubing, before inserting the new set. Hit fill tubing and wait until you see drops of insulin at the end of the needle in the set.

Inserting the Set

IMG_0554.jpg
IMG_0555.jpg
IMG_0556.jpg
IMG_0557.jpg
IMG_0558.jpg

Now lets insert the set!

1: remove the paper covers on the the sides protecting the adhesive tape.

2: remove the plastic cover over the needle

3: Pinch the two plastic handles together to hold the set

4: Find a spot of fat (arm, leg, thigh, buttocks, I've even seen some people use their breast!)

5: Then come straight down into the skin

6: Follow the same instructions with the second part of the set (Don't worry there is no needle with this part!)

End Result

IMG_0560.jpg

You are all done! Now is the time to add the Tegaderm if you feel like it. Make sure to rotate your sets every three days to avoid any issues or skin damage!