Interfacing Accelerometer ADXL 335 With Mediatek LinkIt One Board
by VaibhavK18 in Circuits > Sensors
1843 Views, 12 Favorites, 0 Comments
Interfacing Accelerometer ADXL 335 With Mediatek LinkIt One Board
Using Mediatek LinkIt One You will be able to interface ADXL 335.
The ADXL335 is a small, thin, low power, complete 3-axis accelerometer
with signal conditioned voltage outputs.
Components
ADXL 335 : Accelerometer Sensor
Mediatek LinkIt One Board
Connecting Wires
BreadBoard
Connections
VCC : 3.3V On Board
GND :Ground
X_OUT: A0
Y_OUT: A1
Z_OUT :A2
Code,Compile and Run
Upload the code and now you can see the Output on the Serial Monitor.
Thank you watching this!!