Interfacing BMP180 Barometric Sensor With Mediatek Linkit One
by ParthP23 in Circuits > Sensors
1128 Views, 8 Favorites, 0 Comments
Interfacing BMP180 Barometric Sensor With Mediatek Linkit One
In This Instructable ,You will be able To Interface BMP 180 with Linkit One Board.BMP180 is A Digital Barometric Pressure Sensor through which You will Be able To Measure Pressure, Altitude and Temperature.
Requirements
Mediatek Linkit One Board
BMP 180 : Barometric Sensor
Jumper Wires
USB Cable For Board
Connections
BMP 180 : Barometric Sensor
Vin : 3V3 On Board
GND : Gnd
SCL : SCL On Board
SDA. : SDA On Board
Code,Compile and Run
Upload The Code, Import the header file attached above And You Can See The Output On The Serial Monitor Depending Upon The Environment Conditions.
Congratulations!!! You Have successfully Interfaced BMP 180 with LinkIt One Board!!