Interfacing TSOP1740 With Mediatek LinkIt One
by VaibhavK18 in Circuits > Sensors
1187 Views, 6 Favorites, 0 Comments
Interfacing TSOP1740 With Mediatek LinkIt One
In this Instructables You will be able to interface TSOP 1740 with Mediatek LinkIt One Board.
TSOP 1740 is a Photo Sensor which detects 38Khz frequency which is emitted by remote controllers of TV, Music System,etc.
Requirements
- Mediatek LinkIt One Board
- TSOP1740 Photo Sensor
- BreadBoard
- Jumper wires
Connections
TSOP1740 :Photo sensor
VCC(+5v): 5V On Board
Ground:GND
Out Pin: Pin D8
Code,Compile and Run
I have uploaded the code to interface the photosensor.
Congratulations!!You are ready to Go!!!
Open Serial Monitor To See the Output.