Intruder Alarm With PIR Sensor With Mediatek Linkit One Board
by Got007 in Circuits > Sensors
491 Views, 1 Favorites, 0 Comments
Intruder Alarm With PIR Sensor With Mediatek Linkit One Board
Theft !!Theft!! Theft!!!
Here is the Solution. In This Instructable You will be able to make Intruder alarm for Your Home With PIR interfaced with Mediatek Linkitone Board.As soon as the Burglar Enters Your House In The night .... the alarm will raise!!!!!
What U Need
- PIR Sensor
- Buzzer
- Mediatek LinkIt One Board
- Connecting Wires
- USB cable
Connections
PIR Sensor
- Vcc: 5V on Board
- GND:Gnd
- Out: D2 on Board
- Buzzer Red Wire: D10 On Board
- Buzzer Black Wire: Gnd
Code,Compile and Run
Upload The Code And You are Ready To Go!!!!! Your Intruder Theft Alarm is Ready!!!!
Thanks for Watching It!!!