Ironman Mark42helmet

This helmat is a mark3 template,but i change it to mark42
Here are the steps of making the helmet

First,print a template out,i use the mark3 template,after cut it out,you should use three A4 size to make it (if you wanted to wear it

After you cut the template out ,you must prepare lots of hard cardboard,and make a 3d model with a hot glue gun

You must figured out the mark3 and the mark42helmet's ears is different,so you must change it

Use the fibre glass to harden the helmet

Harden the helmet and make more nice by adding bondo glass

Sand the helmet,add a layer of file inside the helmet,to avoide to hurt your head

Congragilation!!!your done!!!^^