It's Corona Time

This is how you are going to make your corona hat!

1. One long piece of cardboard.

2. One long piece of string.

3. One pair of scissors.

4. 5 pieces of tape.

5. 6 squares of toilet paper (3 connected squares on each side).

6. 2+ things of hand sanitizer.

7. One mask.

8. One sharp pencil.

Get a cardboard box and scissors and cut one of the long flaps on the cardboard box'

After you are done cutting it out grab a pencil (you can also just eyeball it) and draw two circles one on each side where you want to put the string through.

After that use something sharp like a pencil or scissors to make the hole.

Then take your string a cut a very long piece and cut it and put it through the holes that you made. You may have to clear out the hole a little so the string can go through. I used scissors to clear it. You clear it by sticking it the scissor in the hole and spin it around. This should give you a clearer path to put the string through.

Grab some tape, toilet paper, and hand sanitizer (I also got a mask to put in the middle but your choice)! Tape all of those on to the cardboard anyway you like.

When you're done arranging it, tie it on!