Jackal V4

by DJ Radio in Living > LEGO & K'NEX

4501 Views, 16 Favorites, 0 Comments

Jackal V4

Jackal 4 001.JPG
Jackal 4 002.JPG
Jackal 4 003.JPG
Jackal 4 004.JPG
llll 017.JPG
You're not doing me a favor by building this gun.  I'm doing you a favor by giving you instructions for it.

Quick stats:
Range- 45-50 feet with 2 bands
Reload time- 5 seconds
Mag capacity- 8 oodammo rounds.
Very comfy
Very reliable.

Video:



Outer Panels.

Jackal 001.JPG
Make 2 of this.  Put blue rods on one of them, set the other one aside for later.

Inner Panels

Jackal 002.JPG
Jackal 003.JPG
Make 2 of what's pictured.  Set one set aside, put one on the first panel.

Inner Guts.

Jackal 004.JPG
Jackal 005.JPG
Jackal 006.JPG
Jackal 007.JPG
1- Make/gather these.
2- trigger closeup (REMOVE THE BLUE CAP)
3- combine this and the bottom of the barrel.
4- add it all to the gun.

Inner Panels, Part 2.

Jackal 008.JPG
Remember that set of inner panels in step 2 I had you set aside?  Get them and put them on the gun.

Outer Panels, Part 2

Jackal 009.JPG
Jackal 011.JPG
Jackal 012.JPG
Jackal 010.JPG
Add the final panel. 

2- Make this
3- add here.

Handle.

Jackal 013.JPG
Jackal 014.JPG
Jackal 015.JPG
Jackal 016.JPG
Jackal 017.JPG
Jackal 018.JPG
Jackal 019.JPG
Jackal 020.JPG
Jackal 021.JPG
Jackal 022.JPG
Jackal 023.JPG
Whatever.

1- make this
2- closeup on one important section.  This is for comfort
3- Add to gun
4- Make trigger guard
5- Add trigger guard
6- get them
7-8: add them to handle
9: get these
10-11- add to gun.

Ram

Jackal 024.JPG
Jackal 025.JPG
Make the ram.  It's an orange connector, 2 gray connectors wrapped in tape, and a Yellow (in this case it's a gray metallic part) connector.

Mag

Jackal 026.JPG
Jackal 027.JPG
Jackal 028.JPG
Jackal 030.JPG
Jackal 029.JPG
Jackal 031.JPG
Jackal 032.JPG
Whee! Almost done!

1- Get all these
2- Make this
3- make these
4- Connect
5- Gather these
6- put them on
7- Add these to the gun
8- Add Etape.

Loading and Firing.

Jackal 033.JPG
Jackal 034.JPG
Jackal 035.JPG
Jackal 036.JPG
Jackal 037.JPG
Just do it.

1- Take the pusher out and put it on one of the thingys.
2- insert 8 rounds of oodammo
3- Put a Y connector on the top
4- insert it into the gun.  Try to position it like I do for optimum power
5- Take the Y connector off and place it here.

Go have fun with your new gun.

Troubleshooting.

-My mag breaks
A: Use tape on the mag area where specified

-I'm shooting 2 shots at one time!
A: If you are, they are most likely getting high range and they both have equal range.  Don't see it as a problem, see it as a shotgun pistol.