Je Suis Un Espion: Key Mold
Be a super secret, covert spy with simple homemade tools such as this Key Mold. This is a tool for making molds of people's keys while they are still on the ring. "Why would I want a mold of a person's keys?" youâre asking yourself. Well with a mold of a key a copy could be made to allow you to access all sorts of locked... well, locks.
As with all potential unlawful behavior associated with the use of these tools I accept no legal responsibility for your actions or the digestion or use of this information.
This is my first Instructable PLEASE COMMENT and tell me what you think.
As with all potential unlawful behavior associated with the use of these tools I accept no legal responsibility for your actions or the digestion or use of this information.
This is my first Instructable PLEASE COMMENT and tell me what you think.
Gather Your Supplies...
For this project you will need the following:
1. Small hinged tin (Altoids work well)
2. Tin snips (Scissors may work)
3. Clay
4. File (Optional)
5. Keys (from unsuspecting mark)
1. Small hinged tin (Altoids work well)
2. Tin snips (Scissors may work)
3. Clay
4. File (Optional)
5. Keys (from unsuspecting mark)
Construction...
Mark the tin lid while closed to make a sufficient cut for a key to be placed into the tin.
Cut a notch in the tin to allow the key to be placed into the tin.
Work the clay into the tin bottom and lid.
Cut a notch in the tin to allow the key to be placed into the tin.
Work the clay into the tin bottom and lid.
Use the Key Mold...
To use the key mold open lid and press key into clay. Close the lid. Squeeze tin shut. Open lid. Gently lift key out. Close lid and save mold.
Thank You...
This is my first instructable and I would greatly appreciate comments, suggestions, and any words to future ideas. I hope you enjoyed this Instructable. Thank you for reading.
-SWV1787
-SWV1787