"Jones" Chairs
The ParKit Jones Chair design is modified from betterblock.org. The chairs are perfect for flat storage and comfortable, portable, resilient outdoor seating. The chairs are a bit low to the ground for older folks, so we recommend using our folding chair design to accommodate that population.
Supplies
3/4in exterior grade AB plywood
Sandpaper (belt sander, wood router, and orbit sander helpful but not needed)
Oil-based wood stain
Polyurethane finish/sealant
Wide brush
CNC Router and AutoCAD
Cut Chair Components Using CNC Router
Use the AutoCAD file to cut the chair components out using a CNC Router. Use a 1/4in bit.
Sand Components
Use a belt sander to sand around the edges of the components. This makes the chair feel softer and more comfortable.
Use a wood router to smooth sides (follow up with sandpaper if desired).
Use an orbit sander to smooth the surface of the chair.
(optional) Laser Cut Logo Into Chair
ParKit chose to laser cut our logo into the chairs (on the upper back of the chair)! If you have access to a laser cutter and want to make the chair personalized, this is a fun option.
Stain and Finish Components
Use an oil-based wood stain and a polyurethane finish/sealant to protect the components. Apply using a wide brush.
Connect Components
Follow instructions from BetterBlock (see attached PDF) to connect components. Congratulations, your Jones Chair is complete!