K'NEX 4x4 W/ Working Suspension & Front Steering

Welcome to this ible where I'll show how to make a 4x4 Jeep that features a working steering system, plus independent suspension on all four wheels!

! Please vote for my instructable in the Knex contest if you like what you see !

Index, steps:

1. Parts needed
2. Building Chassis part I
3. Building Chassis part II
4. Installing seats
5. Doors & bonnet
6. Finishing up
7. Building a roof
8. Additional pictures

Happy building!

You will need:

Rods: Buy here

• 95x Black/green rod
• 65x Silver/white rod
• 13x Blue rod
• 4x Dark grey/yellow rod
• 3x Green/red rod

Connectors: Buy here

• 7x 8-way black/white connector
• 16x 7-way blue 3D connector
• 30x 4-way silver/purple 3D connector
• 28x 5-way grey/yellow connector
• 35x 4-way green connector
• 25x 3-way dark grey/red connector
• 9x 2 way (V-shape) grey connector
• 10x 2 way (long shape) brown/orange connector
• 25x 1 way grey connector

Other:

• 4x Complete hinge (consists of 4x hinge blue part & 4x green/black part)
• 4x Headtop Translucent yellow
• 15x Metallic spacer (1½ width)
• 7x Blue spacer (½ width)
• 13x Black clip with rod end
• 4x Clip with Angled end 3D Orange
• 9x Clip with Ball end
• 2x Clip with Socket end
• 2x Ball and socket Large (looks more realistic, this will make amount Ball end: 7, Socket end: 1)
• 4x Tyre medium
• 4x Hub/pulley medium
• 4x Open wheel 25mm

• 2x Some kind of spring / small rubber band

Clips: buy here

Knexman parts: buy here

Wheels: buy here

Thank you for reading/scrolling through this ible!

If you have any questions or comments, just leave them below ^^

Dont forget:
! Please vote for my instructable in the Knex contest if you like what you see !