KNIFE BOX
This is a project I made using my mini circular saw and my mini drill press, it's basically a plywood box 5mm wide to contain my Swedish knife, a gift, which is certainly very nice. The knife comes with a leather case, but I think it isn't very protective.
The box has an opening in the top, the hinge is basically a needle cut to size and passed through a hole drilled with my mini drill press.
Each side has been attached by glue.
The dimensions are 9x3.5x1 cm.
I've given a coat of protective varnish.
In the interior of the box I placed two strips of magnets, the kind that used to advertise on the refrigerators, as the knife is all metal. Help set the knife inside ....
The box has an opening in the top, the hinge is basically a needle cut to size and passed through a hole drilled with my mini drill press.
Each side has been attached by glue.
The dimensions are 9x3.5x1 cm.
I've given a coat of protective varnish.
In the interior of the box I placed two strips of magnets, the kind that used to advertise on the refrigerators, as the knife is all metal. Help set the knife inside ....