Key Holder
You can have this acrylic pattern from here:
http://www.leathercraftpattern.com/Acrylic-templat...
The finished size is about: 2.6" x 4.3" x 0.8" (6.5cm x 11cm x 2cm).
Hardware: key hooks x1, 20mm dog hook x1, 201 snap x1, 8mm x 6mm rivet x2.
Leather: We advice 2.0mm (5oz) leather for surface, size 25cm x 37cm, 1.0mm(2.5oz) leather for lining, size 22cm x 25cm.
Tools: If you are a new leather player, try to considerate to have tool kit here: http://www.leathercraftpattern.com/leather-tools-...
Cut All Leather Pieces Use Acrylic Pattern.
Punch Holes.
Punch Stitching Holes.
Install Key Hook With Key Hook Pad on Lining Use Rivets.
Install Snap Socket and Cap Together on Lining and Surface. Also Install Stud and Eyelet on Surface Only.
You Can See the Lining Is Shorter Than Surface, Then the Key Holder Will Have a Natural Bending Effect. We Sew Along Stitching Lines Until We Finish This Work.
