Kierans Corner: Build a Leather Yu-Gi-Oh Card Deck Holder in Under 2 Hours
by JP Ammons in Living > Toys & Games
3494 Views, 26 Favorites, 0 Comments
Kierans Corner: Build a Leather Yu-Gi-Oh Card Deck Holder in Under 2 Hours
In this project I am going to show how to build a card holder in under 2 hours with help from my little brother and my dad.
I Need a Card Holder for My Yu-Gi-Oh Deck!
I do not have a deck holder, I need to build one.
I found this book and we should make this.
It is simple to make, lets do this!
Draw Out Your Plan
First get paper and pencil and draw out your pattern, make sure you have an eraser because mistakes happen. Make sure you use a pencil that has an eraser, we had to use two pencils because the first one was sharpened with no eraser and so we used a second pencil that was missing its lead but had a good eraser on it.
Next cut out your pattern
Next fold your pattern to see if it works, this may take a few tries to get it right.
Workshop Time, Make Sure You Have Supervision!
Go to your workshop
Find some leather
Put the pattern on the leather
Trace your pattern
Cut it out
Punch holes for sewing
I used a used a groove cutter to help with the bends.
Putting Your Project Together
Sew your leather with a blunt needle so you dont stick yourself.
Decide how you want to close your deck holder, I chose to use a box clasp
Be careful not to hit your fingers when you hammer rivets, and we are done!
Total build time with my brother helping took forever, a whole 2 hours!
Stay tuned for more of Kierans Corner and my brother site Torins Tutorials
Because Clone Trooper Armor!
