Klepshydra – the Ancient Greek Water Clock

This is one of the eldest methods for measuring time – in some cultures (Egypt, Greece, Persia, and more) it was developed – and is still in use – thousands of years ago. For my simple model (and at least also the original is not more than this but different materials) of ‘Klepshydra’ you should find everything needed in your household and it is easy to make in no time! This Klepshydra water clock can measure time of about 24 minutes – and this is approximately the time a speaker could maximal get in the world’s first democratic parliaments in Greece of ancient times. So, up from now you know why we are saying :-) »time is RUNNING OUT«!

Tools:

• pencil
• cutter
• glueing tape
• lighter, no problem if you have none
• pin
• a clock – for calibrating, I used my iPad

Materials:

• PET bottle – I used one for sparkling mineral water, 1 l
• paper
• a glass – or an other volume; smaller is better, minimum: volume of PET bottle
• water
• a cup – used as stand for the bottle; this is only a nice option but not necessary
• books – or something you can make a little tower

Just cut a stripe from the paper: length is almost the hight of your glass (receiving volume) x 1,5 in. Mount it vertically on glass with glueing tape; make sure you can later make a mark for the first minute near the bottom of the glass.

Best practise: Heat the pin above / in a lighter’s flame until the tip starts glowing – this makes it more easy to come through the often a bit thicker bottom of the PET bottle. But you can do it also without glowing the pin’s tin.

Close the mini hole with one finger, fill the bottle with water, close the bottle cup and place it upside down in the cup. Build up a little tower of books or something else: at least a bit higher than your receiving volume. Make your calibrating clock (I used the iPad) ready to go.

Place the receiving volume (glass flask) near the book tower, place the PET bottle on top of the book tower – make sure the mini hole is directed towards the receiving volume. Open the bottle cup – otherwise the water cannot come out of the bottle continuously – and open the mini hole by moving your finger away. And here we go! Images here are showing how it should look like after 15 and after 38 seconds …

Start making the scale by doing a mark with the pencil on the paper stripe after the first minute at actual level of water in the bottle, make a mark every minute, number the minutes …

… still running but we’re coming soon to an end – obviously …

After a bit more than 24 minutes the 1 l water has completely done its way down to the receiving glass – »time was running out« so to say :-) I made every minute a mark on the paper stripe (almost, because of making photos) and so this is the final scale and the ‘Klepshydra’ water clock is now ready to measure time itself.

I re-filled the PET bottle, made the receiving volume empty again and started the ‘time is running out’ process again. I was very curious how exactly this simple water clock will measure the time so I started also the clock on the iPad for being able to compare ‘Klepshydro’ water clock time with iPad time and how much the difference will be at the end. The result is amazing: There was visually no difference – that means: it is definitely much less than 1 minute. And this is – in my opinion – definitely accurate for this kind of clock! :-)

P.S. … just another note:
I think the Klepshydra water clock is cool for discussing ‘time’ with little children because you can definitely ‘see’ the time (water) is running and therefore time is nevermore such an abstract thing.

P.P.S.
Also the Klepshydra water clock can be inspiring for philosophical thoughts: No time is lost, it is only changing its ‘state’: From up to down, one volume becomes empty, the other full – because of that …