Knetix Magnum (killerk's Perfected)

Here it is! The first version of killerk's magnum to have a functioning magazine. I was messin around with the magnum and figured out a way to pt on a magazine as well as make it shoot rods, instead of the rod with the red connector. I have also improved the trigger.

Pros.
-Improved trigger
-50-60 foot range
-9 shot magazine
-contained firing pin (so theres no annoying thing sticking out when u pull back the pin)
-good sight

Cons.
-A little flimsy at the middle
-only accurate at short range

ENJOY!

A pretty easy step. These are what holds the front of the gun together and makes it a little stronger.

This mag holds 9 blue rods and never jams

This the upper part of the body of the gun. At the middle its kind of weak so it would be good if you could come up with a way to make supports for it without getting in the way of the ram handle.

This is the lower body (really?). This includes the barrel of the gun as well as the area where the magazine is located.

Fairly easy step. You could really just put any kind of sock on this gun, but this is the one i made. It holds extra ammo and is pretty comfortable.

This is the new improved trigger i came up with. I guess u could use the original killerk trigger if you really wanted to, but I prefer this one.

This sight is accurate at close up targets, but not long range ones.

Putting all the parts together

Adding the rubberbands
To load:lift out mag ram and insert blue rods
To fire: pull back ram until you hear a click. Pull trigger.


Enjoy!