K'nex Headphone Stand
This is what your headphone stand will look like when you are done.
K'nex Headphone Stand
This is the base of the headphone stand and this piece has 4 red connectors, 6 yellow connectors, 2 white connectors and 6 purple connectors. For rods there are 9 white rods and 24 green rods.
This Is the Neck of the Stand
The neck of the stand has 4 blue connectors and 8 purple connectors. For rods there are 7 green rods, 2 red rods and 4 white rods.
Top of the Stand
The top of the stand only has 4 purple connectors. For rods there are 4 white rods and 3 green rods.
Wire Hanger
If you don't have wired headphones then you can skip this step. This has 1 red connector and 1 yellow connector. For rods there is 1 green rod.
Base and Neck Connection
Base and Neck Connected
Top and Neck Connection
Wireless Hanger Done
If you have wireless headphones then you are done!! If you have wired headphones then you have one more step.
Wire Hanger and Neck Connection
Wire Hanger and Neck Connected
YOU ARE DONE!!!
Now you just need to wrap up your cord and put it on the cord hanger. Congratulations!!
Whats Next?
What should i make next out of k'nex write it in the comment section.