K'nex Jigsaw Lift

Hello there,
today I present you the K'nex Jigsaw Lift, please keep in mind that bezempje95 originally invented it, but as he deleted his account/ibles/all his stuff I present you my version of it, with instructions.
This one also features a counterweight, making the lift run a tad more smoothley.

Just follow along the pictures and be sure to read the image notes!

I hope you enjoy it!

If you like this, why not comment, favourite and subscribe?

Oh, don't forget to check out my website for more awesome stuff!

Pieces

Rods

green - 58
white - 156
blue - 122
yellow - 32
red - 6
total rods: 374

Connectors

dark-gray (1-way) - 21
light-gray (2-way) - 1
orange - 10
red - 20
green - 9
yelllow - 52
white - 13
purple 3D - 73
blue 3D - 32
total connectors: 231

Misc

y-connectors - 3
tan-clips - 5
large wheels - 3
green hinge halves - 2
motors - 1
red gears - 8
blue spacers - 50
gray spacers - 36
total misc: 108

Grand Total: 713

The Base

With what else should you start than a base?
Well, a floating lift would be kinda cool....

The Counterweight

Hey, why not build the counterweight before building the actual lift?

The Front Frame

Ok, this is the first actual part of the lift.

Cranks

We somehow have to get this thing going up and down, don't we?

The Lifter

This is what will hold the balls.

Back Frame

If there is a front frame there has to be a back frame...

Various Stuff

Misc stuff like exit track and the crank for the counter weight.

Gears

Finishing all up with the gearing!

Done!

Congradulations, you just finished making the jigsaw lift!
Be sure to switch the motor to the right and watch your balls getting transported up!
No worries, you won't need that many balls ;)

Thank you for making this lift!
Be sure to comment, favourite and subscribe!

Check out my website for more awesome projects!

Keep the derp on!