Knex OSSR

Believe it or not, this stock is optional. It isnt needed for performance, just adds looks and a brace for the arm.

1- build 2 of this frame, note the blue rods and orange connectors.
2- back of stock.

The handle. Simple.

Whee!

1- build these parts. They will be the trigger parts. Read the notes to find out what each part does.
2- the body
3- the body from the top
4- add the trigger part. (the one on the bottom)
5- Gather these parts (2 are optional)
6- add to trigger. By now you may have noticed how the safety works.
7- Add trigger guard
8- add the last part from picture 1 to the top corner.
9- Attach handle to body.
10- Attach stock to handle and body (that is, If you made it)

Erm, whut?

1- the bulk of the barrel. make that, note all blue rods, orange connectors, and spacers.
2- the part that connects to the body (note all blue rods)
3- view of the other part (near the front) Note the 2 y connectors on the bottom and blue rods
4- foregrip
5- attach foregrip
6- top view of barrel. Sorry for blur.
7- The end of barrel
8- attach the end to the rest of barrel.

Connect barrel to body.

1- separate view
2- connect

Yay, you are almost ready to fire this gun!

1- Trigger rubberbands
2- Rubberbands for the oodammo holder
3- my method of looping the rubberbands
4- Hooking the oodammo to the rubbberbands and loading it into the holder.

Now pull the trigger, and fire!

Thanks for viewing!