Knex RBG Plasma Pistol (Better Instructions)

This is a KNEX Halo Plasma Pistol. Please remember that I did not make this. This gun is property of Halo 123 Guns. He created this gun from Halo 3. Once again, it is a gear RBG (rubber band gun) plasma pistol from the hit shooter game Halo. I made this instructable for easier instructions.

*Some Mods. By Me*

The frame of the gun is what is shown below. Be sure to make two of them, one for each side.

Here are some add-ons to the frame.

1-2) Filler Thingy
3) Where the Filler Thingy Goes
4) Another Filler Thingy
5) Where the other Filler Thingy goes
6) Once again...hm... what is it?... oh yeah, a... FILLER THINGY
7) Where the last filler thingy goes

This is the firing system. Instead of a white connector with eight white rods for the rubber band holder, it uses two gears, giving it the maximum hold of 35 rubber bands. The trigger is pretty simple.

1) Make two of these
2) The Trigger
3) Where It All Goes (sorry for blur)

This is just three yellow connectors on a blue rod attached to the handle.

1) Attach this to the handle.

Just a rail. The rubber band goes on here.

1) Make this
2) Add These
3) And These

I think you get where the rubber bands go. As for the trigger, get a rubber band and stretch it on both sides to the third rod from the trigger.