K'nex Scooter

Hello everyone! I have made a new k'nex scooter ; with a driver! The driver is a k'nex man. You might not name your k'nex men, however i call mine Garry.

Please rate, comment, subscribe and comment some more. Thanks guys.

I'll write the parts list here - you'll find out why in a moment!

Rods:                                     Connectors:                 Other:

Green:17                               Dark grey:0                   Little grey cog thing (look at image):2
White:11                               Light grey:4                   K'nex body:1 (optional)
Blue:2                                   Red:0                           Small wheels and tyres:3
Yellow:2                                Green:2                        Tan clips:6
Red:0                                    Purple:0                       Y connectors:7 (optional)
Grey:0                                  Yellow:5                        Ball joint connectors:8 (optional)
                                            Blue:0                          Ball socket connectors:8 (optional)
                                            White:2                        K'nex head parts(not white rod) 1 of
                                           Orange:1                       each (see what i mean on pic)(optional)
                                                                               Grey spacers:2 (6 blue spacers)

Make the man in this step. You will make him differently on purpose so make sure that you do them like shown on here!



That's this step done, so proceed carefully to the next step :)

Make the front side like shown on the picture.

You will make the steering wheel in this step. It does actually work a bot with the k'nex man (Steve).

Here you will put the whole thing together.

Here you will add the man. After that, your done!