Knex Shotgun Pistol

by Hiyadudez in Living > LEGO & K'NEX

3969 Views, 9 Favorites, 0 Comments

Knex Shotgun Pistol

CIMG0065.JPG
CIMG0117.JPG
This is a knex shotgun pistol. This gun fires 3 white rod at the same time. You just cock back the ram, load in the 3 white rod, pull the trigger and.... FIRE!

Pros:
  • Good range
  • Reliable trigger
  • Comfy handle
  • Spreads the bullets
  • Can withstand loads of bands
  • Has iron sights
Cons:
  • You have to manually load the bullets
  • Takes about 6-8 seconds to reload (Thats valuble time in a war!)
WARNING: THIS GUN REQUIRES 1 BROKEN PIECE! 

Check out this video of it firing!


get building! :-)

Also, please rate, comment and subscribe! Thanks :-)

Handle

CIMG0067.JPG
CIMG0068.JPG
CIMG0070.JPG
CIMG0071.JPG
CIMG0072.JPG
This is the handle. Read the notes on the pictures.

The Back End

CIMG0075.JPG
CIMG0076.JPG
CIMG0077.JPG
CIMG0078.JPG
This is the back end. Read the notes on the pictures.

The Main Barrel

CIMG0079.JPG
CIMG0080.JPG
CIMG0082.JPG
CIMG0083.JPG
CIMG0084.JPG
CIMG0085.JPG
CIMG0086.JPG
CIMG0087.JPG
CIMG0088.JPG
This is the main barrel. Read the notes on the pictures.

There are quite alot of pictures on this step because it is quite hard... :/

The Ram + Trigger

CIMG0089.JPG
CIMG0090.JPG
CIMG0091.JPG
CIMG0092.JPG
CIMG0093.JPG
This is the hram and trigger. Read the notes on the pictures.

This requires a cut part.

Assembling

CIMG0095.JPG
CIMG0097.JPG
CIMG0098.JPG
CIMG0099.JPG
CIMG0100.JPG
CIMG0101.JPG
CIMG0102.JPG
CIMG0103.JPG
CIMG0104.JPG
CIMG0105.JPG
CIMG0106.JPG
CIMG0107.JPG
CIMG0108.JPG
CIMG0109.JPG
This is how to assemble all of the parts you just made. Read the notes on the pictures.

Adding the Rubberbands

CIMG0110.JPG
CIMG0111.JPG
CIMG0112.JPG
CIMG0113.JPG
CIMG0114.JPG
CIMG0116.JPG
Adding the rubberbands. Follow the notes.

Finished!

CIMG0116.JPG
Congratulations! You have finshed you shotgun pistol!

Oh yeah... please rate comment and subscribe! Thaanks!

Also, here is a video of how to load and fire it!