Knex Small Assault Rifle
by Liberty Prime in Living > LEGO & K'NEX
5502 Views, 12 Favorites, 0 Comments
Knex Small Assault Rifle
Alpharex here, with my latest creation!
It is the new Assault Rifle!
Pros: Light, Small
Decent Range
IT FIRES WHITES! GASP!
Uses little parts
Large Mag
Mag doesn't jam
TRUE TRIGGER! :D
Cons:
Bad Handle
The stock may make pulling the ram rod back difficult. (That's why the Stock is optional.)
Mag Pusher Sticks out of the Gun.
BUILD AND COMMENT!
It is the new Assault Rifle!
Pros: Light, Small
Decent Range
IT FIRES WHITES! GASP!
Uses little parts
Large Mag
Mag doesn't jam
TRUE TRIGGER! :D
Cons:
Bad Handle
The stock may make pulling the ram rod back difficult. (That's why the Stock is optional.)
Mag Pusher Sticks out of the Gun.
BUILD AND COMMENT!
Barrel
Simple Step. It's in the pictures.
1. Top View
2. Side view
3. Direct Side View
4. Bottom View
1. Top View
2. Side view
3. Direct Side View
4. Bottom View
Stock (Optional)
1. Omniscient view
2. Side View
3. Bottom View
3. Uh... Other Bottom View?
2. Side View
3. Bottom View
3. Uh... Other Bottom View?
Scope
Very easy to make.
1. Side View
2. Front View
1. Side View
2. Front View
Handle
Simple, yet crappy.
Trigger
1. Front View
2. Side View
3. Back View
4. Side View
5. Detailed Top view
2. Side View
3. Back View
4. Side View
5. Detailed Top view
Magazine
Self-Explanitory.
1. Side View
2. Side-Top View
3. Top View
4. Bottom View
1. Side View
2. Side-Top View
3. Top View
4. Bottom View
Body
This is the hardest step....
You may want to look at all the steps FIRST.
1. Side view
2. Front View
3. Top View
4. Bottom of the Body
5. The Middle of the Body
6. The Top of the Body
7. The Front Portion of the Body, and a closer look at the modified gray connectors.
8. Side View of the Top Portion.
You may want to look at all the steps FIRST.
1. Side view
2. Front View
3. Top View
4. Bottom of the Body
5. The Middle of the Body
6. The Top of the Body
7. The Front Portion of the Body, and a closer look at the modified gray connectors.
8. Side View of the Top Portion.
Ram Rod and Mag Pusher
Simple.
Oh yeah, you need to tape the ram rod. A lot.
Oh yeah, you need to tape the ram rod. A lot.
Putting It Together
1. Add on the Barrel to the Body
2. + 3. Put the Mag on.
4. Trigger goes there.
5. Put the Trigger and Handle on.
6. Attach the Stock. (optional)
7. + 8. Put on the Scope.
9. + 10. Insert the Ram Rod.
2. + 3. Put the Mag on.
4. Trigger goes there.
5. Put the Trigger and Handle on.
6. Attach the Stock. (optional)
7. + 8. Put on the Scope.
9. + 10. Insert the Ram Rod.
Elastics
1. Trigger Band.
2. First Ram Rod Band.
3. Second Band.
BTW: You need one more for the Mag Pusher, which will be explained in the next step.
2. First Ram Rod Band.
3. Second Band.
BTW: You need one more for the Mag Pusher, which will be explained in the next step.
Loading/Firing
It fires whites! Yay!
Anyway, you load them in through the mag.
Then push the bullets all the way up.
And attach a band to the Mag Pusher.
To fire, pull back the Ram Rod until the Trigger pops up.
Press the trigger to fire.
Done.
Anyway, you load them in through the mag.
Then push the bullets all the way up.
And attach a band to the Mag Pusher.
To fire, pull back the Ram Rod until the Trigger pops up.
Press the trigger to fire.
Done.