Knex Spiral Wheel Lift 2
The spiral wheel lift 2 is really cool and fun to watch. It takes up a bit of room though. It was originally created by bezempje95. Unfortunately he deleted his instructables account and videos, but there are still some pictures of his lift here.
I was to lazy to make a parts list so you'll have to do without ;-)
Enjoy building and the video!
KneXtreme
I was to lazy to make a parts list so you'll have to do without ;-)
Enjoy building and the video!
KneXtreme
Side 1 Section 1 the Base
Side 1 Section 2 the Entrance
Side 1 Section 3
Side 1 Section 4
Side 1 Section 5 the Exit
Side 2 Section 1 the Base
Side 2 Section 2
Side 2 Section 3
Side 2 Section 4
The Motor
Center Axle
Connecting the Center Axle
Extra Pieces
Connecting the Two Sides
Side 1 Section 6 the Top
Side 2 Section 5 the Top
The Spiral Center
Center Ramp
The Spiral Section 1
The Spiral Section 2
The Spiral Section 3
The Spiral Section 4
The Spiral Section 5
The Spiral Entrance
The Guard Rail
Connecting the Guard Rail
An Extra Piece
Attaching the Tubing
Great! Your almost done. Now all you have to do is to attach the roller coaster tubing. You'll need 2 pieces 42''(aprox.107cm) long. I used the thick tubing. I don't know if the thin tubing works or not. Try it and let me know.
Congratulations! You're Done!
The title says it all. If you want to, send me a picture of the lift you built and I'll add it to the end.
You might have to do a bit tweaking on the lift because it can be a bit quirky sometimes.
KneXtreme
You might have to do a bit tweaking on the lift because it can be a bit quirky sometimes.
KneXtreme