Knex Sword
This is a very awesome Knex sword that was originally designed by KneXtreme. Since he was too eager to build MORE (must build!!), he did not post instructions. The instructions are here, along with the link to the original.
Credits:
%95 to KneXtreme for designing
%5 to Knexinventions 49 for posting
Credits:
%95 to KneXtreme for designing
%5 to Knexinventions 49 for posting
Part 1: Hilt
Pics 15-19 were an update.
Part 2: Blade
Pretty straightforward...
^ = green figure
> or < = 2 way connector
| = long grey rod
< | | >
| ^ |
< | | >
| ^ |
< | | >
| ^ |
< | | >
| ^ |
...as many times as it fits on a grey rod. For closing a part of the blade off, put on multiple 2 ways connectors at a time. You can make one part of the blade, for a dagger, or use two parts to make a sword.
^ = green figure
> or < = 2 way connector
| = long grey rod
< | | >
| ^ |
< | | >
| ^ |
< | | >
| ^ |
< | | >
| ^ |
...as many times as it fits on a grey rod. For closing a part of the blade off, put on multiple 2 ways connectors at a time. You can make one part of the blade, for a dagger, or use two parts to make a sword.
Done!
Thanks for building! Remember this was KneXtreme's work, and have fun!