Knex TRUE Trigger Single Shot Oodammo Rifle

Hey guys, I have a new rifle for you. When I made this, it wasn't shooting all that great. Then I remembered someone saying that Oodammo was really good. So I used that, and it worked better.
Pros
Oodammo
Small(for a rifle)
Has attachments(will be on another ible)
Ok range(30-40 ft with 3 bands
Low piece count

Cons:
Ok accuracy
Ok ergonomics
Wobbly stock

Ok, let's get to building!

ERROR_NAME_BUILD_FROM_PICS

Tape needed. Do not use without tape(one without tape is so you know what pieces)

Pic 1: stock and handle
Pic 2: part that goes inside handle
Pic 3:how to put in handle

Pic 1: inside
Pic 2 out side
Pic 3: fully assembled

Build

Pic 1: left side
Pic 2:right side

Attach

Take off one side of the handle's top green connector and put in the trigger. Close back up after, then put on the trigger rubber bands

Put the ram rod in the hole In the back, and pull the trigger to get it all the way in. Then, use rubber bands.(rubber bands pic 2)

Gj you made my knex gun yayyyyyyyyy