Knex Catapult Pistol

I have searched the internet, and I haven't found any catapult k'nex guns that are like this. So I fixed that. Have fun!

 red 3 slot = 5
yellow 5-slot =14
white 8-slot = 7
green 4-slot =10
grey 1-slot = 12
tan 1-slot = 6
blue 7-slot = 6
grey 2-slot = 1
orange 2-slot = 12

rods:
grey=3
yellow=3
white=44
blue=6
green=33

misc.:
y-connector= 2

 Follow the pictures.
If you have questions, ask.

Follow the pictures.
This is the part that will chuck the piece of your choice as far as possible.

 This is probably the hardest part of building the gun, but it's still relatively easy.

 Just follow the pictures and you should be fine.

I don't really need to say anything here.

 

 I knotted three rubber bands together for this gun, but if you don't want to, you don't have to.

 These next steps are not necessary, but they allow the gun to stand up and they look cooler.

Bend the arm back all the way, put a piece on, and pull the trigger.

But if you leave the arm sticking straight up, it will break, so bend it all the way back.


If you have any improvements or mods to my gun, post them.
But just give me credit
Have fun with my gun!