K'nex True Bolt Action Pistol (instructions)

Hello! These are the instructions to make my bolt action pistol. It's I believe the first ''true bolt action'' pistol on this site. With that I mean, you pull the bolt, then push it back to load a round.

Credit goes to Kinetic for helping me on some parts. (he improved the bullet ramp, and made the slide. I did the basic layout, pistol itself and the original idea and prototype)

Connectors:
-Yellow     : 26
- Blue 3D : 4
- White     : 8
- Red        : 18 (with mag pusher stop ones too)
- Orange  : 12
- L. Gray   : 2 (2 way)
- D. Gray  : 10 (1 way)
- Green    : 3

Rods:
- Green    : 81
- White     : 25
- Blue       : 11
- Yellow   : 0
- Red       : 2
- Black     : 1  (can be grey or clear. Clear or black recommended, they're stronger)

Misc.:
- Hinges     : 2 full hinges + 2 halve (black/green variant)
- Blue clip   : 2
- Beige clip: 2
- Y-clip        : 5
- Blue ring  : 8
- broken rod: at least 1, more for comfortableness ( the middle one in the handle for comfy)

That should cover it

build all the parts

... Read the notes too

.....