Knex Longbow SR-L V2
This was meant to be a sniper rifle, but I added arms, and everyone wanted me to call it a crossbow.
Anyway, it is a sniper bow now, and its the biggest knex project I have ever built in terms of part count.
- very powerful
- good range (50-70 feet)*
- very accurate
- has a sight*
- better stock*
- has a collapsible bipod
- faster load time than v1 (5 seconds for v2, compared to ten seconds for v1)*
- NEVER jams
- is much more sturdier*
- misfires when shot at a straight angle (catches on the connectors). It can shoot right when pointed downwards, so it should be used for sniping off high balconies or ledges
credits:
stock- bartboy
Bipod- KillerK
Anyway, I would use this along with My AR-4 v2 in a knex war.
If you like it, lets build it!
note- due to a new breakthrough in my pics, there is no blur anymore.
Anyway, it is a sniper bow now, and its the biggest knex project I have ever built in terms of part count.
PROS (a * means its an improvement over v1)
- true trigger- very powerful
- good range (50-70 feet)*
- very accurate
- has a sight*
- better stock*
- has a collapsible bipod
- faster load time than v1 (5 seconds for v2, compared to ten seconds for v1)*
- NEVER jams
- is much more sturdier*
CONS
- out of all my knex projects, this uses the most parts. (but im sure this isnt a problem for every other knexer out there)- misfires when shot at a straight angle (catches on the connectors). It can shoot right when pointed downwards, so it should be used for sniping off high balconies or ledges
credits:
stock- bartboy
Bipod- KillerK
Anyway, I would use this along with My AR-4 v2 in a knex war.
If you like it, lets build it!
note- due to a new breakthrough in my pics, there is no blur anymore.
Get Materials
Connectors
- 17 white
- 16 blue
- 4 purple
- 24 yellow
- 28 green
- 27 red
- 31 orange
End Connectors
- 4 tan lock
- 2 black hinge
- 2 blue hinge
Rods
-1 black
-7 grey
-6 red
-8 yellow
-13 blue
-33 white
-lot of green
Miscellaneous
-4 blue spacer
-35 silver spacer
-1 head top
TOTAL-222 parts (not counting green rods)
wow, I have nearly no parts at all....way lower than my estimate.
- 17 white
- 16 blue
- 4 purple
- 24 yellow
- 28 green
- 27 red
- 31 orange
End Connectors
- 4 tan lock
- 2 black hinge
- 2 blue hinge
Rods
-1 black
-7 grey
-6 red
-8 yellow
-13 blue
-33 white
-lot of green
Miscellaneous
-4 blue spacer
-35 silver spacer
-1 head top
TOTAL-222 parts (not counting green rods)
wow, I have nearly no parts at all....way lower than my estimate.
Handle and Stock.
This is the stock and handle. stock is modified off of Bartboy's stock.
picture 1- the overview
picture 2- the stock only
Picture 3- the ratchet and trigger.
picture 1- the overview
picture 2- the stock only
Picture 3- the ratchet and trigger.
Main Barrel
This is a new 5- layer thick barrel
Picture 1- overview
Picture 2- some parts of the barrel removed
Picture 3- bipod holder
Picture 4- attach to handle
Picture 5- make this part.
Picture 6- connect it
Picture 1- overview
Picture 2- some parts of the barrel removed
Picture 3- bipod holder
Picture 4- attach to handle
Picture 5- make this part.
Picture 6- connect it
Bow
this is the bow. build it.
and note the rubberband placement and the attachment to barrel.
and note the rubberband placement and the attachment to barrel.
Top Rail (optional)
this part is optional, but it makes the gun look better and adds a sight.
picture 1- the top rail.
Picture 2-3 the connection
picture 1- the top rail.
Picture 2-3 the connection
Bipod (optional)
you know the drill:
Picture 1- build the legs (note the rubber band)
Picture 2- attach to barrel
Picture 1- build the legs (note the rubber band)
Picture 2- attach to barrel
Ammo
This is the modded ammo (picture 1)
It should be easy to load and fire the gun from here.
Enjoy, and dont forget to rate!
It should be easy to load and fire the gun from here.
Enjoy, and dont forget to rate!