LED CAR TAIL LAMPS
trying to get better lights for my car i have created an new guide
old car laps used 21W+21W+21W+5W total 68W used
it is known that bulb lights produce 5% light and 95 % heat so i tried to optimise this by using LEDs
this is how finished product looks like and also bulb/LED light comparison
price for this project is under 50$
i had used zextar leds (12V ones)
http://www.zexstar.com/index.php?cat=c3_LEDuri-Superflux.html
old car laps used 21W+21W+21W+5W total 68W used
it is known that bulb lights produce 5% light and 95 % heat so i tried to optimise this by using LEDs
this is how finished product looks like and also bulb/LED light comparison
price for this project is under 50$
i had used zextar leds (12V ones)
http://www.zexstar.com/index.php?cat=c3_LEDuri-Superflux.html
SIZING
remove tail lights from car and measure the dimessions of original mount and cut an piece of test board (or any isolator) to fit your mount
MOUNTING
after you have an basic board you can start to fit as many LEDS as you can for every light bulb replacement
Also you can cut your tail light to an new shape so that more LEDs can enter
test the circuit after every "bulb replacement" assembly to be shure that you did not mount any led wrong
as you can see i have rear light mounter right
Also you can cut your tail light to an new shape so that more LEDs can enter
test the circuit after every "bulb replacement" assembly to be shure that you did not mount any led wrong
as you can see i have rear light mounter right
STILL MMOUNTING
mounting all LEDS
to get dimmed light for position lights i have used 12 1N4001 diodes in series with pozition lights
those lights are lit in 2 wais 1 in series with diodes and directly to get full light for brake light
to get dimmed light for position lights i have used 12 1N4001 diodes in series with pozition lights
those lights are lit in 2 wais 1 in series with diodes and directly to get full light for brake light