LED Lights for Liquor Bar
Hey Guys
I have a Liquor Bar of small bottles at home.
It is located on a 3 level of glass Shelves.
But i wanna make it a bit special by adding LED Lights to it!
Enjoy my project
:)
I have a Liquor Bar of small bottles at home.
It is located on a 3 level of glass Shelves.
But i wanna make it a bit special by adding LED Lights to it!
Enjoy my project
:)
Removing Liquor Bottles
First , remove all the bottles from the shelves , and place it in a secure location
Then , mark with a pencil the location of the wires.
Then , mark with a pencil the location of the wires.
Start the Carve! - First Stage
Take your driller with a small drill bit, and start moving slowly from start to end.
Our goal is to carve a small yet deep enough ditch for the electrical wire
Our goal is to carve a small yet deep enough ditch for the electrical wire
The Carve! - Second Stage
Finishing the Carving!
Very easy !
Very easy !
The LED Lights Strip!
Ordered from eBay .
Very cheep
Very cheep
Prepare the LED Strip for the Shelves
First , cut a 12v 2a wire , split it and add a small switch
Then, measure the overall length of the needed wire .
I wanted to connect the wires in a Serial Connection , so i have to cut expose the wire and solder to it the two small wires to connect to the LED strip.
Then, measure the overall length of the needed wire .
I wanted to connect the wires in a Serial Connection , so i have to cut expose the wire and solder to it the two small wires to connect to the LED strip.
Measure the Length of the Wire
Soldering Time!
Make Sure It Works!
Connect it to the electricity!
Install the Wires + Shelves
Mount the shelves back , and install the wire slowly inside the canal
Make Sure Everything Works!
Apply Sealant
Still Filling Sealant
Finished!
Finished the work!
All works great
The lighting is awesome , and gives the bottles great look
Comments are welcomed!
:)
All works great
The lighting is awesome , and gives the bottles great look
Comments are welcomed!
:)