LED'S on 220V AC GRID 7-8 WATTS ONLY
by btahir90 in Circuits > LEDs
60265 Views, 34 Favorites, 0 Comments
LED'S on 220V AC GRID 7-8 WATTS ONLY
IN THIS INSTRUCTABLE I WILL TELL U HOW TO MAHE AN EFFICIENT LIGHT CONSISTS OF LED'S THAT ARE COMMONLY RUN ON DC CIRCUIT.
HERE IT WILL WORK ON 220 V AC FROM GRID
POWER CONSUMPTION IS 7 TO 8 WATT
AND ITS TRANSFORMER LESS.
COMPONENTS:
• Capacitors 2× 0.47uF 275v AC
• Capacitor 1× 10uF 400v AC
• Resistor 1× 10Ω 0.25W
• Resistor 1× 1MΩ 0.25W
• Fuse with holder 1×200ma
• 50×Led’s white 5mm
Hardware and tools required:
• Cable Duct 25×16mm
• Hand hack saw
• Soldering iron
• Drill machine
• Wire cutter
• Steel ruler
• marker
DRILL BIT ACORDING TO LED SIZE
HERE IT WILL WORK ON 220 V AC FROM GRID
POWER CONSUMPTION IS 7 TO 8 WATT
AND ITS TRANSFORMER LESS.
COMPONENTS:
• Capacitors 2× 0.47uF 275v AC
• Capacitor 1× 10uF 400v AC
• Resistor 1× 10Ω 0.25W
• Resistor 1× 1MΩ 0.25W
• Fuse with holder 1×200ma
• 50×Led’s white 5mm
Hardware and tools required:
• Cable Duct 25×16mm
• Hand hack saw
• Soldering iron
• Drill machine
• Wire cutter
• Steel ruler
• marker
DRILL BIT ACORDING TO LED SIZE
STEP 1
1. Get a duct and cut a small piece for 50 led’s depending on design and shape
STEP 2
2. Remove its cover
STEP 3
Mark drill Points with marker and steel ruler
STEP 4
Drill Holes on marked points
STEP 5
5. Place Led’s in each hole
STEP 6
6. Solder led’s all in series
STEP 7
7. Solder all other components according to circuit diagram and place them in bottom of duct use 200mA Fuse instead of 1A as in circuit.
STEP 8
RUN THE CIRCUIT.
BECAREFULL WHILE USING 220V ITS DANGEROUS IF U ARE NOT PROFFESIONAL
I AM NOT RESPONSABLE FOR ANY DAMAGE .
BECAREFULL WHILE USING 220V ITS DANGEROUS IF U ARE NOT PROFFESIONAL
I AM NOT RESPONSABLE FOR ANY DAMAGE .