Ladle Lamp

This is a lamp for my kitchen done with a laddle $ 10 and a plate of plastic.
Bill of Materials:

. A metal ladle;
. A plastic plate;
. 60 cm of transparent cristal wire;
. A mignon lamp;
. A socket (for the lamp);
. Ruller, Pencil, Calliper
. A Dremel

Get the ladle and find the middle of semi-sphere. Mark.
Measure the socket diameter and mark it on the ladle, using a pencil.
Now, get the Dremel with a cut disk and cut out the hole.
Use the Dremel to sand the hole.

Make holes in the plate for the passage of the wire and the two screws.
Thread the wire through the center hole and knot. 

Peel the ends of the wire and plug in the socket.
Attach the socket to the ladle and connect the lamp in it.
Connect the wires to your electric installation, and turn it on.

Sorry for my english. Is my first instructable too.