Lamp With Bulb

I apologize for the pictures, I never thought I'd put on Instructables this article.

Recycling dose of a deodorant or air wick.

First i wanted to use deodorant container, but we found that no balance, you'll see why, so I used the air wick container.

• Remove the lid slowly and carefully, because it is under pressure.

Attention! do not use toxic containers

• Carefully polished

• Wash the container and leave it to dry

• Apply a coat of car

• Make holes for the switch and power supply

• We use a light bulb.
• Remove The Tab on the light Bulb
• Break the insulation layer (black part)
• Filament pull out
• Fill the bulb with silicone or gel

We used two LEDs (12v), one red and one blue, for the blush I put a 10k resistor to weaker light.

I used a SPCO (single pole, centre off) switch type.