Laptop Riser for Less Than 1 € in 5 Minutes

I've tried some solutions to rise my netbook for a better cooling, but they were too big or too expensive.

So i came up with this: The easy and cheap riser!

You need:
- marker or pencil
- duck tape (of course)
- ruler
- a piece of plastic cable troughing (a leftover of an installation)

First measure the width of your laptop.

I've got an Acer Apire One with a width of 245 mm, so i decided to cut the plastics at 250 mm.

As the Acer has a width of 245 mm i cut the plastics at 250 mm.
The golden rule is: Always add a few mm safety clearance.

Now you have to measure the size of the rear feet of the laptop and cut 2 holes in the plastics, where they can fit in.

After that tape the whole thing to gather better stability.

Well, what can i say? We're done...