Laser Cut Pendant Light for Home

Dear All,

To make this beautiful Light hanging you can follow these steps or whatsapp me @ 7036068650

for any doubt.

The file for this laser cut i have taken from 3axis.com the link is below

https://3axis.co/laser-cut-wood-pendant-light-chan...

Thank you

To make this item you will need

• Laser cut pieces
• Fevicol
• and black colour paint .

Hi All,

We just need patience and time now .

• As i have the cutting in 3mm mdf so i have pasted two pieces together to make it little thick as shown in the video.
• Then colour all the pieces in the black colour acrylic.

Tip of the project: While using Fevicol for pasting use black colour in it.

Use newspaper to keep things clean and meshfree!!

Dear All ,

Procedure:

1. Get a wire ,bulb holder and a small white light of 0.5 watt.
2. Adjust the height of the bulb and setup.

Tips :

• When fixing to the hanging place take the help of electrician for fixing it .
• Be careful so that you don't get shock.

This is a very simple and very attractive .