Lazer Sync to Music Sound Waves

This is a very awsome cool trick. Itd be even coolier if you took it to a whole new level as in getting more lazers and different colors.

You will need to gather all your materials and have them ready. (To make kt easier on yourself)

MATERIALS:

Can

Tape

Speaker

Balloon

Lazer

A small mirror (i used a old cd and cut it into a smal pieace and used the back. You will need the mirrow like material or mirrow to reflect the Lazer so the product will work).

Get one ballon and cut it as shown in the picture. You can get balloons any where at your local stores and you can use any ballons (just make sure they are not small ballons. Get the regular party size).

Now take your can. (Make sure your can is completely open on both sides). I used a can opener. Just open up both sides. Next You want to stretch the ballon over the can, Then tape it around.

now get your mirror or like i used an old cd as a reflector.

Cut it into a small pieace to go onto the ballon.

Next simply attach the refletor the middle of the ballon. (Using tape)

Next put the speaker end where the music plays into the can. Don't put the speaker into the can fully but half way.

Next position the speaker and let it sit. Make sure the reflector end shows because across from it will be the lazer.

now take the lazer and tape the button down so the lazer will stay on.

now position the lazer so it can point directly to the reflector. I neded to use something to make the lazer eye level with the reflector. So i put something under it. You can get a Lazer from almost any store or online.

now i turned off my lights in the room. What you need to do now that you have the lazer Pointing directly into the reflector. You should see a reflection of lazer on your wall straight across from the whole set up.

Watch how the lazer syncs to every drop, bass and hi hats of the beat onto the wall. Its very cool.