Leather Dairy
You can have this acrylic pattern from here:
http://www.leathercraftpattern.com/leather-acrylic...
The finished size is about: 7.7" x 5.3" x 1.2" (19.5cm x 13.5cm x 3cm).
Hardware: A6 size loose leaf binder x1, 10mm x 8mm Chicago screw or rivet x2, A6 size refill page x2, A6 clapboard x2.
Leather: We advice 2.0mm (5oz) leather for surface, size 30cm x 20cm, 1.0mm(2.5oz) leather for lining, size 44cm x 24cm.
Tools: If you are a new leather player, try to considerate to have tool kit here: http://www.leathercraftpattern.com/leather-tools-...
Cut All Leather Pieces From Acrylic Pattern and Punch Stitching Holes by Pattern.
We Make the Strap, Here Let Me Introduce You How to Make a "press Edge" Effect Strap. Glue Strap Stiffener Into 2 Pieces of Strap Leather. You Should Thin the Edge of Strap Leather at First.
Glue Them Together.
Sew Lock on Surface Leather.
Test Whether the Strap Is Fasten or Not.
Sew the Strap, But From the 3rd Stitching Hole.
Stop on the Symmetric Stitching Hole.
Sew the Left Stitching Holes With Surface Leather.
Now We Make the Lining.
Sew the First Card Slot on Card Back Leather, But Only Sew the Bottom Line.
Sew the Second Card Slot With Card Back Leather, Only Sew Bottom Stitching Line Too.
Sew the 3rd Card Slot On, But Only Sew Middle Stitching Line.
Thin All Edges and Paint Glue On.
Glue and Sew All Pieces on Flesh Side of Surface As Pictures Show.
Install A6 Size Loose Leaf Binder.
Install Clapboards and Refill Page On.
