Leather Dairy

by LZpattern in Craft > Leather

592 Views, 8 Favorites, 0 Comments

Leather Dairy

TB2oyllam8mpuFjSZFMXXaxpVXa_!!1109028782 - 副本.jpg
TB2u7BjactnpuFjSZFKXXalFFXa_!!1109028782.jpg
TB2YliRX3FkpuFjSspnXXb4qFXa_!!1109028782.jpg
TB2.ZOQX8NkpuFjy0FaXXbRCVXa_!!1109028782.jpg
TB2KHWUX9FjpuFjSszhXXaBuVXa_!!1109028782.jpg

You can have this acrylic pattern from here:

http://www.leathercraftpattern.com/leather-acrylic...

The finished size is about: 4" x 5.7" x 1.2" (10.2cm x 14.5cm x 3cm).

Hardware: A7 size loose leaf binder x1, 10mm x 8mm Chicago screw or rivet x2, A6 size refill page x2.

Leather: We advice 2.0mm (5oz) leather for surface, size 15cm x 37cm, 1.0mm(2.5oz) leather for lining, size 10cm x 30cm.

Tools: If you are a new leather player, try to considerate to have tool kit here: http://www.leathercraftpattern.com/leather-tools-...

Because We Have the Basic of A-133 Dairy Making, for This One, We Have a Quick Instruction. Cut All Pieces From Acrylic Pattern and Punch Stitching Holes by Pattern.

IMG_0001.JPG

Fold the Passport Slot and Align the Edge of Main Body, Sew Them Together, You Can See the Pen Slot Is Finished Too.

IMG_0003.JPG

Sew Card Slot on Card Slot Back Leather, Only Sew Middle Stitching Lines.

IMG_0002.JPG
IMG_0004.JPG

Sew Card Slot Back Leather With Surface Leather.

IMG_0005.JPG

Install A7 Loose Leaf Binder on and Add Refill Pages, the Dairy Is Finished.

IMG_0006.JPG